PRZ6000型全自动石油产品热值测定仪

PRZ6000型全自动石油产品热值测定仪

一、概述： 适用于测量电力、煤炭、冶金、石化、质检、环保、水泥、造纸、地勘、科研院等行业部门测量煤炭、焦炭、石油、水泥生料，砖坯及其它固体或液体等可燃物的发热量，符合国标GB/T213-2008《煤的发热量测定方法》、GB/T384-1988《石油产品热值测定法》的要求。

PRZ6000型全自动石油产品热值测定仪

二、特点:
1、采用微机实现测量过程的自动控制和计算，系统采用Windows XP操作系统，操作全过程汉字提示，人机交互，即学即用，按提示操作即可完成试验。在测试的同时可进行数据处理、数据查询、数据修改等其它工作，功能优越，使用方便。
2 、高度自动化，自动点火、自动注、排水，自动称水重、调水温、只需装好氧弹，仪器便可完成全部测试工作。
3、电脑控制自动标定仪器热容量，输入相关数据，微机自动换算被测物质的高低位发热量,自动存盘并打印结果。
4、采用串口通信技术，故障率低，自动保护，自动诊断，使用环境宽松。测量精度高分析快，精密测温探头，实时显示温度-时间曲线，方便直观。 
5、低故障率，自保护、自诊断技术、故障查找快捷、便于维护。
6、简便易用，界面友好，软件容错性好，易学易用。
7. 结果准确，采用*的冷却校正体系，保证仪器性能的测试稳定性。
8、6000型微机全自动量热仪作为单筒量热仪系统使用，若对两台热量计进行异步控制，请选用6000B微机全自动(双控)量热仪系统。

三、技术指标及参数:
1、使用环境：5-40℃
2、热容量：约10500J/K
3、分辨率：0.0001℃ 
4、测量精度:符合GB/T 213－2008要求
5、测试时间：15min左右
6、外水筒容量 30L 
7、内水筒容量 约2.3L 
8、点火电压 24V 
9、点火时间 6分钟点火
10、定量误差：≤±1g
11、测量误差：国标
12、主机功耗：≤40W　                        　
13、电源电压：AC220V±10％50Hz      

PRZ6000 type automatic determination instrument of calorific value of petroleum products
One, overview: suitable for measurement of electric power, coal, metallurgical industry, petrochemical, quality inspection, environmental protection, cement, paper, geological exploration, scientific research institute and other departments to measure the coal, coke, petroleum, cement raw material, heat quantity of brick and other solid or liquid combustible, meet the national standard GB /T213-2008 "determination of calorific value of coal" GB/T384-1988 "method, determination of calorific value of petroleum products" requirements.
Two, characteristics:
Automatic control and calculation of 1, using microcomputer measurement process, the system adopts Windows XP operating system, the operation of the whole process of Chinese characters hint, human-computer interaction, learning namely, according to the prompts to complete the test. In the test and can make data processing, data query, data modification and other work, superior function, easy to use.
2, a high degree of automation, automatic ignition, automatic filling, automatic drainage, water weight, water temperature regulation, only need to place the oxygen bomb, the instrument can perform all of the testing work.
Automatic equipment calibration of heat capacity 3, computer control, input data, microcomputer automatic conversion of measured material of high calorific, automatically save and print the results.
4, by using serial port communication technology, low failure rate, automatic protection, automatic diagnosis, using relaxed environment. High measuring accuracy analysis of fast, precise temperature measuring probe, real-time display of temperature time curve, convenient and intuitive.
5, low failure rate, self protection, self diagnosis technology, fault finding fast, easy maintenance.
6, easy to use, friendly interface, software fault tolerance, easy to use.
The 7 result is accurate, the unique cooling correction system, ensure the stability of performance testing instrument.
8, 6000 type microcomputer automatic calorimeter as a single barrel calorimeter system to use, if the counting of asynchronous control for two sets of heat, please use the 6000B microcomputer automatic (dual control) calorimeter system.
Three, the technical indexes and parameters:
1, the use of the environment: 5-40 C
2, the heat capacity: about 10500J/K
3, resolution: 0.0001 C
4, the measuring accuracy conforms to the GB/T 2132008 requirements:
5, the test time: About 15min
6, the water barrel capacity 30L
7, the water cylinder capacity of about 2.3L
8, the ignition voltage 24V
9, the ignition time of 6 minutes of ignition
10, quantitative error: less than 1G
11, the measurement error: better than the national standard
12, the host power consumption: less than 40W
13, the power supply voltage: AC220V + 10%50Hz